Wireless addressable Fire Alarm Control Panel, 30 devices
The Wi-Fyre Transponder has been designed to communicate with up to 30 mixed field devices such as smoke and heat detectors, manual call points, sounders and LED indicators, and input/output devices.
This version includes the LCD indication and control display.
The Wi-Fyre Transponder is small and easy to install. Commissioning is accomplished either using an inbuilt 5 button plus LCD panel front display, or via an optional Wi-Fyre PC interface card connected to a PC or laptop.
Specifications
- Operating Frequency: 868 - 870 MHz, 14dBm
- Operating Channels: 28
- Field Devices (max): 30 per transponder
- Range:150m open area
- Power Source: Addressable Loop, Conventional Zone and/or Auxiliary
- Display: LCD
- Local Control (optional): 5 Tactile push-buttons or PC connection
- Zone In/Out Ratings: 19 - 24Vdc, 400mA
- Zone In/Out Terminal Alarm Resistance: Equivalent to 450 Ohm
- Sounder In/Out Ratings (max): 8 - 24Vdc, 800mA
- Auxiliary Supply Voltage (max): 19 - 40Vdc
- Manual Alarm Relay Contact: 1 x Solid-state normally open, 60Vdc, 600mA
- Automatic Alarm Relay Contact:1 x Solid-state normally open, 60Vdc, 600mA
- Common Fault Contact: 1 x Solid-state normally closed (failsafe), 60V, 500mA
- Cable Terminals: Rising clamp 1.5mm
- Operating Current (nom.): 12mA
- Configuration Interface: Local and/or Wi-Fyre PC interface
- Operating Temperature: -10 to +55°C
- Ingress Protection: IP 54, for Indoor use only
- Humidity:10 to 95% RH (non-condensing)
- Dimensions (Width x Height x Depth): 234 x 164 x 75mm
- Weight: 620g
- Housing Material: Polycarbonate
- Colour:White
- Cable Entries: 6 x 20mm
- Applicable Standards: EN54-25, BS 5839 Part 1:2002, ENTSI 300:220
The Wi-Fyre Transponder has been designed to communicate with up to 30 mixed field devices such as smoke and heat detectors, manual call points, sounders and LED indicators, and input/output devices.
This version includes the LCD indication and control display.
The Wi-Fyre Transponder is small and easy to install. Commissioning is accomplished either using an inbuilt 5 button plus LCD panel front display, or via an optional Wi-Fyre PC interface card connected to a PC or laptop.
Specifications
- Operating Frequency: 868 - 870 MHz, 14dBm
- Operating Channels: 28
- Field Devices (max): 30 per transponder
- Range:150m open area
- Power Source: Addressable Loop, Conventional Zone and/or Auxiliary
- Display: LCD
- Local Control (optional): 5 Tactile push-buttons or PC connection
- Zone In/Out Ratings: 19 - 24Vdc, 400mA
- Zone In/Out Terminal Alarm Resistance: Equivalent to 450 Ohm
- Sounder In/Out Ratings (max): 8 - 24Vdc, 800mA
- Auxiliary Supply Voltage (max): 19 - 40Vdc
- Manual Alarm Relay Contact: 1 x Solid-state normally open, 60Vdc, 600mA
- Automatic Alarm Relay Contact:1 x Solid-state normally open, 60Vdc, 600mA
- Common Fault Contact: 1 x Solid-state normally closed (failsafe), 60V, 500mA
- Cable Terminals: Rising clamp 1.5mm
- Operating Current (nom.): 12mA
- Configuration Interface: Local and/or Wi-Fyre PC interface
- Operating Temperature: -10 to +55°C
- Ingress Protection: IP 54, for Indoor use only
- Humidity:10 to 95% RH (non-condensing)
- Dimensions (Width x Height x Depth): 234 x 164 x 75mm
- Weight: 620g
- Housing Material: Polycarbonate
- Colour:White
- Cable Entries: 6 x 20mm
- Applicable Standards: EN54-25, BS 5839 Part 1:2002, ENTSI 300:220