The fire detector provides reliable early warning of a Fire condition responding to fixed threshold smoke concentration detected in the protected premises.
The smoke sensitivity is factory preset in accordance with European Standard EN54-7.
The fire detector is controlled by a microprocessor. FD8030 operates with an improved algorithm for self-compensation of the optic chamber contamination, signaling the necessity for dusting the chamber. It is done quickly due to the easy dismantling and assembling of the body cover.
The construction of the optic chamber and the new technology used in the manufacturing of the screen provides high level protection against entering dust particles and insect and working under strong air
Supply voltage: 10-30 VDC
Current in standby mode: 120uA/22.5V DC
Current in alarm condition
- With base type 8000 or 8000D : 8mA /10VDC or 25mA /30VDC
- With base type 8000R or 8000DR : 18mA /10VDC or 55mA /30VDC
Smoke sensitivity: complies with EN54-7:2000 / A2:2006
Time to enter in standby mode: up to 40s
Reset time: 2s
Protected area: circle with 15m diameter (according to EN54)
Height of mounting: up to 11m complies with EN54
Degree of protection: IP43
Operational temperature range: -10ºC~55ºC
Relative humidity: 93±3 % at 40ºC
Dimensions (base included): diam 100 x 47mm
Weight (base 8000 included): 100g
Cable: 2-wire single or multi-core isolated and shielded
Cross section: 0.8~1.5 mm2