Click to Zoom
Power supply 24 VAC / 3.5A

DESCRIPTION
The Power Supply Device FS 5200P is an autonomous power supply source of combined type with a backup battery and charging device. Its function is to provide continuous power supply for the evices in the signaling installations, fire alarm installations and automation of the fire alarm quipment. In the event of a Fault condition (no mains supply, discharged or disconnected backup battery, burnt fuse) it switches its relay output. For a light signaling of the various conditions are used green and yellow LEDs located on the front panel. The device is in compliance with the European Standard EN 54-4.

FEATURES
Input voltage: 187~253)V AC, 50 / 60 Hz
Maximum installed capacity: 120 VA
Output voltage: 17~28 VDC
Output current (in the presence of mains power supply): up to 3,5 A (continuous)
Output current: (in the absence of mains power supply and fully charged backup battery): 3,5 A (up to 2 h)
Over-discharging protection below: 17V DC
Output for Fault condition: Relay, potencial free, switching 1A/30VDC
Backup battery: 2x12V DC / 7 Ah
Dimensions: 330x305x80 mm
Weight (excluding the backup battery): 4,1 kg
Operating temperature minus: 5ºC ~40ºC
Relative humidity: 92±3 % at 40ºC
Degree of protection: IP 30