100 series Bus indoor thermostat

In a building, up to 4 thermostats can be installed that can control up to 4 independent circuits. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.

- Full integration in MyJABLOTRON = information of the current status and remote control of the thermostat
- Automatic switch-over to the economy temperature on setting the premises
- Weekly schedule mode
- Possibility to enter the manual temperature setting mode
- Possibility to switch off if only a minimum temperature should be maintained in the building
- Heating suppression if a window is open
- Report in the case of overheating or freezing
- Easy control by dial
- Temperature history graph
- Tamper sensor

Specifications
- Power: via the control panel bus +12 V (+9 - +15 V)
- Backup (idle) mode consumption: 1 mA
- Current consumption for cable selection: 1 mA
- Recommended installation height: 1.5 m above floor level
- Dimensions: 66 x 90 x 22 mm
- Operating temperature range: -10 to +70 °C
- Measurement accuracy in the range of operating temperatures: 0.1 °C
- It also meets the requirements of: EN 50130-4, EN 55022