A motion detector combining a passive infrared (PIR) sensor and a microwave (MW) sensor. The dual detection increases resistance to false alarms in environments prone to sudden temperature fluctuations, such as air drafts, radiant heating sources, and similar conditions. The standard PIR detector triggers the microwave detection, which either confirms or disproves the presence of motion.

The product is compatible only with control panels JA-102K, JA-103K, JA-107K, and JA-152KR, or newer.
_______________________________________________________________________________________________________________________
Technical data:
Power: 2x alkaline battery, type LR6 (AA) 1.5 V / 2.45 Ah. (Please note: Batteries are not included)
Typical lifetime of batteries: approx. 2 years
Low battery voltage: < 2.4 V
Quiescent current consumption: 70 µA
Maximal current consumption: 40 mA
Communication band : 868.1 MHz, JABLOTRON protocol
Maximum radio-frequency power (ERP): < 25 mW
Recommended installation height: 2.5 m
Detection angle / detection coverage (PIR): 110 ° / 12 m
Detection angle / detection coverage (MW): 90 ° / 12 m
Operating frequency MW: 24.125 GHz
Maximum effective radiated power MW (EIRP): 50 mW
Dimensions: 60 x 98 x 52 mm
Weight (without batteries): 93 g
Classification: security grade 2 / environmental class II (according to EN 50131-1). (With increased immunity against false alarms, EN 50131-1 does not meet.)
Environment : indoor general
Operating temperature range: -10 °C to +40 °C
Average operating range: 75% RH, non-condensation
Certification body: Trezor Test s.r.o. (no. 3025)
In compliance with: EN IEC 63000, EN 50130-4, EN 55032, EN 50131-1, -2-4, -5-3, -6, EN IEC 62368-1, EN ETSI 300 220-1, -2, EN ETSI 300 440
Can be operated according to: ERC REC 70-03
MW Frequency band according to ERC REC 70-03: band m)
ITU designation for MW: P0N
ITU designation for SRD: 80K0F1DAN
Recommended screw: 2x ø 3.5 x 40 mm (countersunk head)