Click to Zoom
The JA-60G detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL). It has 2 concentration levels with 2 different reactions. The main detector features are: high reliability and sensitivity, compact size, 230V (110V optional) power supply and long stability & lifetime. It has a built-in transmitter to wirelessly send an alarm signal.

Detector specifications
- Sensitivity (concentration):
* Methane: 1st level - 10 ± 3% LEL (0.50% vol) / 2nd level - 18 ± 3% LEL (0.80% vol)
* Propane: 1st level - 18 ± 3% LEL (0.30% vol) / 2nd level - 30 ± 3% LEL (0.50% vol)
* Iso-butane: 1st level - 23 ± 3 % LEL (0.30% vol) / 2nd level - 40 ± 3 % LEL (0.50% vol)
LEL = Lower explosive limit (100%) according to IEC 60079-20-1: for Methane is 4.4% volume concentration for propane 1.7% vol, for iso-butane 1.3% volume, calibrated in the production of iso-butane
- Mains: 230 V / 50 Hz Power consumption approx 2 W, protection class II
- Beep: 94 db / 0.3 m
- Relay Output: optional response to 1st or 2nd level
- Output capacity: max.230 V / 5 A
- Operational temperature: -10°C to +40°C
- Relative humidity: 25 to 75%
- Storage temperature: -20°C to +50°C
- Stabilization time: 90 s
- Response time: max. 10 s
- Detection method: catalytic combustion
- Housing: IP 30 (EN 60 529)
- Communication band: 433.92 MHz
- Communication range: 50m open area
- Operating conditions: CTO VO-R/10/09.2010-11
- Meets: EN 50194-1, IEC 60079-29-1, IEC 50130-4, EN 55022, ETSI EN 300220, EN 60950-1
- Intended for non-explosive areas - Zone 2: EN 60079-10
- VVUÚ Certified by certification body No 3076
- Designed to operate at normal atmospheric pressures 86 to 106 kPa
Note: not suitable for hydrogen