Each PRT66MF series reader can be used as an universal identification point connected to the access controller or configured for autonomous work, as a simple access controller for a single door. In the first case, the reader's functionality is limited only to reading an identifier (card/PIN) and sending data to an external controller, which takes further action. In case of work in a standalone mode, PRT66MF terminals can independently supervise a single door using data entered in the process of their configuration.

Features:
- 13.56 MHz MIFARE® cards
- Reads CSN, MSN or SSN number
- CSN, SSN and MSN card numbers
- Programmable data output format
- Formats: Wiegand 26-66bit, Magstripe (Clock and data), RS232, RACS (Roger) and others
- Various ways of PIN and keypad codes transmission
- LED and Buzzer controlled through separate inputs
- Outdoor/indoor installation
- MIFARE® cards programming (RARC program required)
- May operate as an offline standalone access controller
- Up to 120 indexed users with card and/or PIN (stand-alone mode)
- Authentication: Card and/or PIN
- Event log for 1024 transactions
- Two NO/NC inputs
- Two 150mA transistor outputs
- Operation with XM-2 I/O extension module
- Built-in 1.5A/30V relay output
- Possible connection of the external PRT series reader (two way door
control)
- Programmed manually or from PC
- Free managing software (RARC)
- Tamper
- CE mark

Technical Specification:
- Supply voltage: 10-15 VDC
- Current consumption: 65mA
- Anti-sabotage protection (Tamper) : NC contact, 50mA/24V, IP67
- Reading distance: Up to 6 cm
- Environmental class: Class IV, outdoor-general
- Temperature: -25°C- +60°C
- Relative humidity: 10 to 95% (non condensing)
- Dimensions H x W x D : 85 X 85 X 27 mm
- Weight: ~120g
- Approvals: CE