RFT1000 reader is equipped with an optical fingerprint scanner and MIFARE® proximity reader. Build-in memory allows to program 1900 fingerprint templates. Fingerprint recognition can be performed by comparison scanned template with internal user database (1:N mode) or by comparison with template read from the proximity card (1:1 mode). The 1:1 mode allows to provide highest, third class of recognition in access control system and meets certain legal regulation which require biometric data to be stored on data containers belonging to employee. Reader can be connected to access controllers equipped with RACS CLK/DTA interface (Roger controllers) or other controllers accepting popular Wiegand data output format.

Features:
Optical fingerprint scanner
- ISO/IEC 14443A MIFARE® proximity card reader
• Scanned fingerprint is compared with template read from
proximity card (1:1 mode)
- Scanned fingerprint is compared with template read from internal database (1:N - mode)
- 1900 fingerprint templates in 1:N mode
- RACS CLK/DTA and Wiegand data output interfaces
- RogerVDM program for device configuration and management
- Integration with PR Master program (RACS 4)
- Encrypted communication protocol AES128 CBC
- Programmable via RS485 or UDP

Specifications:
- Supply voltage: Nominal 12VDC, min./max. range 10-15VDC
- Current consumption: Average 130mA for 12VDC
- Communication interfaces: LAN, RS485 (configuration)
- RACS CLK/DTA, Wiegand (output data)
- Input lines IN1, IN2: Inputs electrically biased to +12V via 5.6kohm resistor, triggering level 3V ?~ 4.5V
- Environmental class: Class I, indoor general conditions,(according to EN 50131-1
- Temperature: +5?ºC ~ +40?ºC
- Relative humidity: 10 to 95% (no condensation),
- IP41
- Tamper: Isolated contact, NC type, 24V/50 mA rated
- Dimensions (W x H x D): 85mm x 85mm x 52mm
- Weight:160g