UltraSync Communicator with IP and 4G/2G dual path suitable for both fire and intrusion panels
Overview:
UC240 UltraSync Communicator is a dual path alarm signalling unit for transmitting alarm signals from a customer’s alarm panel to a Central Monitoring Stations (CMS). The monitoring path is based on IP and SIM 4G/2G mobile technology. The unit is designed for use in both security and fire systems.
• Dual-path monitoring for low, medium and high risk sites, covering intruder applications, fire and more.
• These monitored alarm signalling devices are small enough to fit inside most alarm panels. They use two signalling paths – if the primary path is down, the secondary path kicks in. And if that happens, the secondary path will use the primary path reporting and polling times.
• The primary path uses IP technology to send alarm signals over the customer’s network or broadband hub.
• The secondary path uses 4G or 2G mobile connectivity – with dual SIMs for extra resilience.
• EN50131 Grade 3 and EN50136 certified for intrusion systems.
• EN54-21 certified for fire alarm systems.
Alarm panel interfaces:
• 16 general purpose alarm inputs (Logic High = +2V to +30V/Logic Low = <1.3V)
• 3 relay outputs
• Unconnected state: Logic Low
• Standard screw terminals
• Programmable function output-for remote control of site devices
• Line fault output-for status indication at site of alarm signalling path
• Dial Capture with phone line simulation
• Onboard RS232 or RS485 for direct panel interface to some panels
Dial Capture features:
• Converts dialler alarm systems into high security signalling devices
• Alarm panel interface supports: Ademco Contact ID, Ademco Hi Speed, Ademco 4+1, Ademco 4+2, SIA 1/2/3 Configuration
• Simple single push button pin learn
• iOS and Android installer app
• Using on board menu driven by push buttons
Network:
• Communicator type: 2G, 4G, Cellular, IP
• GSM frequency LTE: Penta-Band 700 (Bd28) / 800 (Bd20) / 900 (Bd8) / 1800 (Bd3) / 2100 MHz (Bd1) + GPRS Dual band (900/1800 MHz)
Reporting;
• Reporting protocols: Contact ID, SIA
• Supported receivers: UltraSync
Interfaces:
• Ethernet: RJ-45 1000 Mbps Ethernet Interface
• Antenna: Yes, included
Input / output:
• Inputs: 16 general purpose alarm inputs
• Outputs: 3 relay outputs
Electrical:
• Operating voltage: 9.5 to 30 VDC
• Current consumption: 85mA @12 VDC
Physical:
• Physical dimensions: 95 x 67 x 17 mm
• Colour: Black
Environmental:
• Operating temperature: -10°C to +55°C
• Relative humidity: 5 to 75%
• Environment: EN50130-5 ; Class II - Indoor (general)
Regulatory:
• Certification: EN50131 Grade 3, EN50136, EN54-21
Overview:
UC240 UltraSync Communicator is a dual path alarm signalling unit for transmitting alarm signals from a customer’s alarm panel to a Central Monitoring Stations (CMS). The monitoring path is based on IP and SIM 4G/2G mobile technology. The unit is designed for use in both security and fire systems.
• Dual-path monitoring for low, medium and high risk sites, covering intruder applications, fire and more.
• These monitored alarm signalling devices are small enough to fit inside most alarm panels. They use two signalling paths – if the primary path is down, the secondary path kicks in. And if that happens, the secondary path will use the primary path reporting and polling times.
• The primary path uses IP technology to send alarm signals over the customer’s network or broadband hub.
• The secondary path uses 4G or 2G mobile connectivity – with dual SIMs for extra resilience.
• EN50131 Grade 3 and EN50136 certified for intrusion systems.
• EN54-21 certified for fire alarm systems.
Alarm panel interfaces:
• 16 general purpose alarm inputs (Logic High = +2V to +30V/Logic Low = <1.3V)
• 3 relay outputs
• Unconnected state: Logic Low
• Standard screw terminals
• Programmable function output-for remote control of site devices
• Line fault output-for status indication at site of alarm signalling path
• Dial Capture with phone line simulation
• Onboard RS232 or RS485 for direct panel interface to some panels
Dial Capture features:
• Converts dialler alarm systems into high security signalling devices
• Alarm panel interface supports: Ademco Contact ID, Ademco Hi Speed, Ademco 4+1, Ademco 4+2, SIA 1/2/3 Configuration
• Simple single push button pin learn
• iOS and Android installer app
• Using on board menu driven by push buttons
Network:
• Communicator type: 2G, 4G, Cellular, IP
• GSM frequency LTE: Penta-Band 700 (Bd28) / 800 (Bd20) / 900 (Bd8) / 1800 (Bd3) / 2100 MHz (Bd1) + GPRS Dual band (900/1800 MHz)
Reporting;
• Reporting protocols: Contact ID, SIA
• Supported receivers: UltraSync
Interfaces:
• Ethernet: RJ-45 1000 Mbps Ethernet Interface
• Antenna: Yes, included
Input / output:
• Inputs: 16 general purpose alarm inputs
• Outputs: 3 relay outputs
Electrical:
• Operating voltage: 9.5 to 30 VDC
• Current consumption: 85mA @12 VDC
Physical:
• Physical dimensions: 95 x 67 x 17 mm
• Colour: Black
Environmental:
• Operating temperature: -10°C to +55°C
• Relative humidity: 5 to 75%
• Environment: EN50130-5 ; Class II - Indoor (general)
Regulatory:
• Certification: EN50131 Grade 3, EN50136, EN54-21
