A motion detector combining a passive infrared (PIR) sensor and a microwave (MW) sensor. The dual detection increases resistance to false alarms in environments prone to sudden temperature fluctuations, such as air drafts, radiant heating sources, and similar conditions. The standard PIR detector triggers the microwave detection, which either confirms or disproves the presence of motion.
The product is compatible only with control panels JA-102K, JA-103K, JA-107K, or newer.
This is the successor to the original JA-120PW detector. The mechanical design is unified with the standard motion detectors of the JABLOTRON 100+ series. The detector’s function is identical to the design version JA-122PW and allows full configuration even without physical access to the peripheral.
In addition to burglary evaluation, the detector can be used for home automation functions, such as automatic lighting upon motion. Microwave detection can be disabled when the system is disarmed, so the detector responds solely to the PIR sensor, providing a faster response for automation functions. The immunity of both PIR and MW detection is adjustable independently. The sensitivity of the microwave sensor can be regulated in 4 levels directly using the F-Link software.
_________________________________________________________________________________________
Technical data:
Power: from control panel bus 12 V DC (8–15 V)
Quiescent current consumption: 2 mA
Maximal current consumption: 8 mA
Recommended installation height: 2.5 m
Detection angle / coverage (PIR): 110 ° / 12 m
Detection angle / coverage (MW): 80 ° / 12 m
Operating frequency: MW 24.125 GHz
Maximum effective radiated power MW (EIRP): <50 mW
Dimensions: 60 x 98 x 52 mm
Weight: 85 g
Classification: security grade 2 / environmental class II (according to EN 50131-1). With increased immunity against false alarms, EN 50131-1 does not meet.
Environment : indoor general
Operating temperature range: -10 °C to +40 °C
Average operating humidity: 75% RH, non-condensation
Certification body: Trezor Test (no. 3025)
In compliance with: EN IEC 63000, EN 50130-4, EN 55032, EN 50131-1, -2-4, EN 62368-1, EN ETSI 300 440
Operating conditions according to general authorization: ERC REC 70-03
MW Frequency band according to ERC REC 70-03: band m)
ITU designation for MW: P0N
ITU designation for SRD: 80K0F1DAN
Recommended screw: 2x ø 3,5 x 40 mm (countersunk head)
The product is compatible only with control panels JA-102K, JA-103K, JA-107K, or newer.
This is the successor to the original JA-120PW detector. The mechanical design is unified with the standard motion detectors of the JABLOTRON 100+ series. The detector’s function is identical to the design version JA-122PW and allows full configuration even without physical access to the peripheral.
In addition to burglary evaluation, the detector can be used for home automation functions, such as automatic lighting upon motion. Microwave detection can be disabled when the system is disarmed, so the detector responds solely to the PIR sensor, providing a faster response for automation functions. The immunity of both PIR and MW detection is adjustable independently. The sensitivity of the microwave sensor can be regulated in 4 levels directly using the F-Link software.
_________________________________________________________________________________________
Technical data:
Power: from control panel bus 12 V DC (8–15 V)
Quiescent current consumption: 2 mA
Maximal current consumption: 8 mA
Recommended installation height: 2.5 m
Detection angle / coverage (PIR): 110 ° / 12 m
Detection angle / coverage (MW): 80 ° / 12 m
Operating frequency: MW 24.125 GHz
Maximum effective radiated power MW (EIRP): <50 mW
Dimensions: 60 x 98 x 52 mm
Weight: 85 g
Classification: security grade 2 / environmental class II (according to EN 50131-1). With increased immunity against false alarms, EN 50131-1 does not meet.
Environment : indoor general
Operating temperature range: -10 °C to +40 °C
Average operating humidity: 75% RH, non-condensation
Certification body: Trezor Test (no. 3025)
In compliance with: EN IEC 63000, EN 50130-4, EN 55032, EN 50131-1, -2-4, EN 62368-1, EN ETSI 300 440
Operating conditions according to general authorization: ERC REC 70-03
MW Frequency band according to ERC REC 70-03: band m)
ITU designation for MW: P0N
ITU designation for SRD: 80K0F1DAN
Recommended screw: 2x ø 3,5 x 40 mm (countersunk head)
